6mm Toughened Glass Cut to Size

6mm toughened glass cut to size is the thickness most domestic glass projects need, whether the person ordering it knows that yet or not. It's the middle ground in the range, thick enough for a splashback or a shelf to feel solid, without the extra weight and cost of stepping up to 8mm or beyond. If your project doesn't obviously call for something thicker, 6mm is very likely the right answer.

Using 6mm for a Toughened Glass Cut to Size

A toughened glass cut to size is the single most common use for 6mm, suitable up to 1,200mm without needing to step up in thickness. Behind a hob, a sink, or across a full run of worktop, 6mm holds flat against the wall and handles the kind of knocks a kitchen actually produces. It's available as a clear toughened glass cut to size panel, or at 6mm and above in a frosted finish for a £30 supplement.

6mm for Glass Shelves and Shower Enclosures

The same logic applies inside the room. Toughened glass shelves at 6mm carry ordinary household weight without flexing, and shower enclosures need the strength for safety as much as looks. Both are places people stand close to the glass regularly, which is exactly where toughened glass earns its place over standard float glass.

When to Step Up to 8mm or Thicker

Move up to 8mm toughened glass for wider table tops and balustrade infill panels, where the extra thickness holds the pane flat across a bigger span. Move down to 4mm toughened glass for greenhouse glazing, cabinet doors and picture framing, where anything heavier would be unnecessary. Whichever thickness fits, panels are cut and toughened to your measurements from the full toughened glass cut to size range, with a lead time of 10 to 12 working days from confirmed measurements and a tolerance of +/-2mm.